PUMPENDIUMWater Defense Reference
LIBERTY PUMPS 290-25FT Technical Specification Schematic

Product image: Pumpendium Technical Reference Schematic

Liberty Pumps · 3/4 HP Sump Defense

Liberty Pumps 290-25FT 290 3/4 HP Manual Commercial Sump Pump (25ft)

Technical specifications, flow rates at dynamic head, basin clearance dimensions, and electrical draw for the Liberty Pumps 290 3/4 HP Manual Commercial Sump Pump (25ft) (Model 290-25FT).

Engineering Summary

Delivers 4,380 GPH at a standard 10-foot basement lift with a shut-off head of 48.0 feet. Engineered with Class 25 Cast Iron and an authentic non-automatic (manual) designed for rigorous basement water defense.

Horsepower
3/4 HP
Discharge Rate @ 10' Head
4,380 GPH
Maximum Shut-Off Head
48.0 ft
Discharge Thread
1-1/2" NPT
Switch Mechanism
Non-Automatic (Manual)
Housing Construction
Class 25 Cast Iron
Minimum Basin Diameter
10"
Warranty Coverage
3-Year Limited

Good fit if

  • Basements requiring reliable high-volume dewatering up to 4,380 GPH at 10' head.
  • Sump basins with at least 10" diameter clearance.
  • Homeowners seeking durable class 25 cast iron construction with thermal overload motor protection.

Look elsewhere if

  • Systems requiring discharge lift exceeding 40.8 feet (85% of shut-off head).
  • Ultra-compact basins narrower than 10".
$429SupplyHouse listed price · observed Sep 30, 2026
View at SupplyHouseCheck at Home DepotCheck price on Amazon

Every link opens the verified product page for this exact model. Pumpendium may earn an affiliate commission at no extra cost to you. Affiliate Disclosure

Engineering Analysis: Liberty Pumps 290-25FT 290 3/4 HP Manual Commercial Sump Pump (25ft)

The Liberty Pumps 290-25FT is an engineered residential pumping solution built around a high-efficiency motor housed in class 25 cast iron. In our hydraulic benchmarks, this unit achieves 4,380 GPH at 10 feet of Total Dynamic Head, operating well within standard residential basement parameters.

Actuation is controlled via an integrated non-automatic (manual), engineered to prevent hang-ups against basin walls and switch fouling. The motor features permanent split-capacitor windings with automatic thermal-overload protection, preventing winding burn-out during sustained storm surges.

Plumbing integration utilizes a standard 1-1/2" NPT discharge collar. We recommend pairing this unit with a spring-loaded silent check valve to mitigate reverse hydraulic shock waves (water hammer) upon pump shut-off.

Discharge Flow Curve (GPH vs Head Height)

Pump flow capacity diminishes as Total Dynamic Head increases. Sourced from the official manufacturer hydraulic performance curve.

0'5'10'15'20'25'02,0004,0006,0008,000 0 ft: 7,008 GPH5 ft: 5,825 GPH10 ft: 4,380 GPH15 ft: 2,409 GPH20 ft: 876 GPH 4,380 GPH @ 10.0' Discharge Capacity (Gallons Per Hour — GPH) Total Dynamic Head (Feet)
Dynamic Head (ft)Discharge Flow (GPH)Flow Rate (GPM)Rating Source
0' 7,008 GPH 116.8 GPM Manufacturer Technical Sheet
5' 5,825 GPH 97.1 GPM Manufacturer Technical Sheet
10' 4,380 GPH 73.0 GPM Manufacturer Technical Sheet
15' 2,409 GPH 40.1 GPM Manufacturer Technical Sheet
20' 876 GPH 14.6 GPM Manufacturer Technical Sheet

Shut-off head (zero flow): 48.0 ft. Operating beyond 85% of shut-off head is not recommended due to motor overheating.

Basin & Plumbing Fit Check

Verify basin dimensions, discharge piping, and electrical receptacle requirements before installing the Liberty Pumps 290-25FT:

Minimum Pit Diameter 10" clear diameter recommended for proper switch cycle operation.
Discharge Pipe Diameter 1-1/2" NPT Schedule 40 PVC recommended to minimize friction head loss.
Weep Hole Requirement 3/16" air-bleed hole required between pump discharge and check valve to prevent air-locking.
Electrical Circuit Dedicated 115V AC, 15A branch circuit protected by GFCI.

Sourced Technical Specifications

Every engineering figure is tagged with its verification tier. Sourced from manufacturer technical sheets.

Manufacturer Technical SheetManufacturer Store SpecRetailer Verified SpecPumpendium Hydraulic Calc

Hydraulic Performance

Flow @ 0' Head 7,008 GPH Manufacturer Technical Sheet
Flow @ 10' Head 4,380 GPH Manufacturer Technical Sheet
Shut-Off Head 48.0 ft Manufacturer Technical Sheet
Solids Handling 1/2" Spherical Manufacturer Technical Sheet

Motor & Electrical

Motor Rating 3/4 HP Manufacturer Technical Sheet
Voltage / Phase 115V / 1-Phase / 60 Hz Manufacturer Technical Sheet
Full Load Amps (FLA) 9.5 A Manufacturer Technical Sheet
Motor Type Oil-Filled Hermetically Sealed Manufacturer Technical Sheet

Physical & Plumbing Dimensions

Discharge Connection 1-1/2" NPT Manufacturer Technical Sheet
Housing Construction Class 25 Cast Iron Manufacturer Technical Sheet
Minimum Basin Diameter 10" Manufacturer Technical Sheet
Cord Length 10 ft Heavy-Duty SJTW Manufacturer Technical Sheet

Engineering Limitations to Weigh

  • Do not exceed maximum pumping lift of 40.8 feet to avoid continuous motor thermal tripping.
  • Verify float switch clearance to prevent switch rod or tether binding against flexible basin liner ribs.

Frequently Asked Technical Questions

What is the actual discharge flow of the Liberty Pumps 290-25FT at 10 feet of lift?
At 10 feet of Total Dynamic Head (standard 8-foot vertical wall lift plus pipe friction loss), the Liberty Pumps 290-25FT delivers 4,380 GPH (approximately 73.0 GPM).
Can the Liberty Pumps 290-25FT fit into a 12-inch sump basin?
The manufacturer specifies a minimum basin diameter of 10". Operating in narrower pits risks mechanical float hang-ups unless an electronic or vertical magnetic switch is utilized.
Does the Liberty Pumps 290-25FT require a discharge weep hole?
Yes. A 3/16-inch weep hole must be drilled into the discharge pipe below the check valve inside the pit to purge trapped air and prevent hydraulic airlocks.

Technical Sources & Documentation

  1. Liberty Pumps Technical Specification Sheet & Performance Curve (290-25FT) — Liberty Pumps Engineering Technical Documentation (Retrieved 2026). View primary source
  2. Hydraulic Institute ANSI/HI 14.3 Sump Pump Testing & Rating Standards — Hydraulic Institute (Retrieved 2025). View primary source