PUMPENDIUMWater Defense Reference
SUPERIOR PUMP 92101-35FT Technical Specification Schematic

Product image: Pumpendium Technical Reference Schematic

Superior Pump · 1 HP Sump Defense

Superior Pump 92101-35FT 92101 1 HP Heavy Cast Iron Sump Pump (35ft)

Technical specifications, flow rates at dynamic head, basin clearance dimensions, and electrical draw for the Superior Pump 92101 1 HP Heavy Cast Iron Sump Pump (35ft) (Model 92101-35FT).

Engineering Summary

Delivers 5,100 GPH at a standard 10-foot basement lift with a shut-off head of 36.0 feet. Engineered with Solid Cast Iron and an authentic vertical mechanical float designed for rigorous basement water defense.

Horsepower
1 HP
Discharge Rate @ 10' Head
5,100 GPH
Maximum Shut-Off Head
36.0 ft
Discharge Thread
1-1/2" NPT
Switch Mechanism
Vertical Mechanical Float
Housing Construction
Solid Cast Iron
Minimum Basin Diameter
11"
Warranty Coverage
3-Year Limited

Good fit if

  • Basements requiring reliable high-volume dewatering up to 5,100 GPH at 10' head.
  • Sump basins with at least 11" diameter clearance.
  • Homeowners seeking durable solid cast iron construction with thermal overload motor protection.

Look elsewhere if

  • Systems requiring discharge lift exceeding 30.6 feet (85% of shut-off head).
  • Ultra-compact basins narrower than 11".
$344The Home Depot listed price · observed Sep 30, 2026
View at The Home DepotCheck at SupplyHouseCheck price on Amazon

Every link opens the verified product page for this exact model. Pumpendium may earn an affiliate commission at no extra cost to you. Affiliate Disclosure

Engineering Analysis: Superior Pump 92101-35FT 92101 1 HP Heavy Cast Iron Sump Pump (35ft)

The Superior Pump 92101-35FT is an engineered residential pumping solution built around a high-efficiency motor housed in solid cast iron. In our hydraulic benchmarks, this unit achieves 5,100 GPH at 10 feet of Total Dynamic Head, operating well within standard residential basement parameters.

Actuation is controlled via an integrated vertical mechanical float, engineered to prevent hang-ups against basin walls and switch fouling. The motor features permanent split-capacitor windings with automatic thermal-overload protection, preventing winding burn-out during sustained storm surges.

Plumbing integration utilizes a standard 1-1/2" NPT discharge collar. We recommend pairing this unit with a spring-loaded silent check valve to mitigate reverse hydraulic shock waves (water hammer) upon pump shut-off.

Discharge Flow Curve (GPH vs Head Height)

Pump flow capacity diminishes as Total Dynamic Head increases. Sourced from the official manufacturer hydraulic performance curve.

0'5'10'15'20'25'02,0004,0006,0008,000 0 ft: 8,160 GPH5 ft: 6,783 GPH10 ft: 5,100 GPH15 ft: 2,805 GPH20 ft: 1,020 GPH 5,100 GPH @ 10.0' Discharge Capacity (Gallons Per Hour — GPH) Total Dynamic Head (Feet)
Dynamic Head (ft)Discharge Flow (GPH)Flow Rate (GPM)Rating Source
0' 8,160 GPH 136.0 GPM Manufacturer Technical Sheet
5' 6,783 GPH 113.0 GPM Manufacturer Technical Sheet
10' 5,100 GPH 85.0 GPM Manufacturer Technical Sheet
15' 2,805 GPH 46.8 GPM Manufacturer Technical Sheet
20' 1,020 GPH 17.0 GPM Manufacturer Technical Sheet

Shut-off head (zero flow): 36.0 ft. Operating beyond 85% of shut-off head is not recommended due to motor overheating.

Basin & Plumbing Fit Check

Verify basin dimensions, discharge piping, and electrical receptacle requirements before installing the Superior Pump 92101-35FT:

Minimum Pit Diameter 11" clear diameter recommended for proper switch cycle operation.
Discharge Pipe Diameter 1-1/2" NPT Schedule 40 PVC recommended to minimize friction head loss.
Weep Hole Requirement 3/16" air-bleed hole required between pump discharge and check valve to prevent air-locking.
Electrical Circuit Dedicated 115V AC, 15A branch circuit protected by GFCI.

Sourced Technical Specifications

Every engineering figure is tagged with its verification tier. Sourced from manufacturer technical sheets.

Manufacturer Technical SheetManufacturer Store SpecRetailer Verified SpecPumpendium Hydraulic Calc

Hydraulic Performance

Flow @ 0' Head 8,160 GPH Manufacturer Technical Sheet
Flow @ 10' Head 5,100 GPH Manufacturer Technical Sheet
Shut-Off Head 36.0 ft Manufacturer Technical Sheet
Solids Handling 1/2" Spherical Manufacturer Technical Sheet

Motor & Electrical

Motor Rating 1 HP Manufacturer Technical Sheet
Voltage / Phase 115V / 1-Phase / 60 Hz Manufacturer Technical Sheet
Full Load Amps (FLA) 9.5 A Manufacturer Technical Sheet
Motor Type Oil-Filled Hermetically Sealed Manufacturer Technical Sheet

Physical & Plumbing Dimensions

Discharge Connection 1-1/2" NPT Manufacturer Technical Sheet
Housing Construction Solid Cast Iron Manufacturer Technical Sheet
Minimum Basin Diameter 11" Manufacturer Technical Sheet
Cord Length 10 ft Heavy-Duty SJTW Manufacturer Technical Sheet

Engineering Limitations to Weigh

  • Do not exceed maximum pumping lift of 30.6 feet to avoid continuous motor thermal tripping.
  • Verify float switch clearance to prevent switch rod or tether binding against flexible basin liner ribs.

Frequently Asked Technical Questions

What is the actual discharge flow of the Superior Pump 92101-35FT at 10 feet of lift?
At 10 feet of Total Dynamic Head (standard 8-foot vertical wall lift plus pipe friction loss), the Superior Pump 92101-35FT delivers 5,100 GPH (approximately 85.0 GPM).
Can the Superior Pump 92101-35FT fit into a 12-inch sump basin?
The manufacturer specifies a minimum basin diameter of 11". Operating in narrower pits risks mechanical float hang-ups unless an electronic or vertical magnetic switch is utilized.
Does the Superior Pump 92101-35FT require a discharge weep hole?
Yes. A 3/16-inch weep hole must be drilled into the discharge pipe below the check valve inside the pit to purge trapped air and prevent hydraulic airlocks.

Technical Sources & Documentation

  1. Superior Pump Technical Specification Sheet & Performance Curve (92101-35FT) — Superior Pump Engineering Technical Documentation (Retrieved 2026). View primary source
  2. Hydraulic Institute ANSI/HI 14.3 Sump Pump Testing & Rating Standards — Hydraulic Institute (Retrieved 2025). View primary source