Quick verdict
The WBPS50 is for a homeowner replacing a tired primary who wants the backup, the alarm and phone alerts solved in one purchase. A solid-state air switch on the main pump avoids a float that can snag, and the controller keeps logging when the internet drops. It needs a basin at least 15 in wide, the battery is extra, and its figures come from Wayne's listing rather than a published data sheet.
Who it fits, and who should skip it
A good fit if
- Your old primary pump is due for replacement anyway.
- You want power-outage and Wi-Fi-loss alerts on your phone.
- Your basin is 15 in across or larger.
- You want a display upstairs showing water level and battery health.
Look elsewhere if
- Your basin is narrower than 15 in.
- You only need a backup beside a primary you trust.
- You want a maker flow curve before you buy.
Specifications
Primary pump
| Horsepower | 1/2 HP primary AC pump |
|---|---|
| Max flow | 5,100 GPH (85 GPM) |
| Max head | 25 ft maximum lift (listing) |
| Voltage | 120 V primary; DC backup pump on a 12 V battery |
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system; Wayne WSB1275 maintenance-free battery installation manual 690003-001 B.
Switches
| Switch type | Solid-state air switch on the primary; vertical float on the backup |
|---|
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system.
Backup
| Water per battery charge | Up to 10,000 gallons with a WSB1275 battery |
|---|---|
| Battery | Not included; Wayne WSB1275, 12 V 75 Ah sealed lead-acid, maintenance free |
| Battery temperature | Normal 77 °F (25 °C); when charged, -40 °F to 140 °F |
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system; Wayne WSB1275 maintenance-free battery installation manual 690003-001 B.
Monitoring
| Alerts | Power loss and Wi-Fi loss alerts; built-in siren during power outages |
|---|---|
| Remote display | Shows pump activity, battery health and water level |
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system.
Build
| Discharge | 1-1/2 in, with one 1-1/2 in check valve included |
|---|---|
| Basin size | 15 in diameter or larger |
| Construction | Stainless steel housings with a cast iron bottom; both pumps fully submersible |
| Dimensions and weight | 13.5 x 9 x 15.5 in; 45 lb (listing) |
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system.
Support
| Warranty | 5 years; assembled in the USA |
|---|
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system.
Versions
Wayne sells one WBPS50 configuration; the WSB1275 battery is a separate purchase.
| Version | Part number | What differs | Listing |
|---|---|---|---|
| WBPS50 smart system | WBPS50 | 1/2 HP primary with air switch, DC backup with vertical float, controller, display, battery box | View on Amazon |
Figures: Amazon listing B0GWNX4S5G, Wayne WBPS50 smart sump pump system.
Installation and setup
The WBPS50 replaces whatever is in the pit now, so the first job is removing the old pump and confirming the basin measures at least 15 in across. Both pumps are fully submersible, with stainless steel housings over a cast iron bottom, and the system arrives with a 1-1/2 in discharge and one 1-1/2 in check valve.
The battery box needs a dry, ventilated spot outside the pit. Wayne's WSB1275 manual warns against airtight enclosures, places that can flood, and anywhere near sparks, flames or heat-making equipment, because the battery can give off hydrogen while charging. Lift it carefully too: the manual points out that it is heavy for its size. Set the remote display where someone will actually see it, such as a kitchen or hallway.
Switch and sizing notes
The primary starts from an integrated solid-state air switch rather than a float. With no arm or tether moving through the water, there is nothing to snag on the pit wall or a cord. The backup keeps a vertical float, so it starts on rising water even if the main pump's electronics or power fail.
Wayne's listing gives 5,100 GPH as the primary's top flow and 25 ft as its maximum lift. Real flow at your height will be lower than the headline, and no curve was published with the listing, so compare it with your inflow and lift on the sizing calculator. For the backup, the useful number is volume: up to 10,000 gallons on a charged WSB1275, which the runtime calculator can turn into hours for your inflow.
Ownership and maintenance
The smart controller is the point of this system. It alerts you if the house loses power or the Wi-Fi drops, sounds a loud siren during outages, and keeps counting pump cycles while offline, then syncs the history once the connection returns. The display shows pump activity, water level and battery health at a glance.
The WSB1275 is a sealed, maintenance-free battery, so there is no water to top up. Wayne gives its normal operating temperature as 77 °F, and an unheated basement in winter will shorten what it delivers. Keep thinner, gasoline and detergents off it when cleaning, since the manual warns they can crack the case. The system carries a 5-year warranty; keep the receipt.
Pros and cons
Pros
- Primary and backup bought as one matched system.
- Air switch on the primary has no float to snag.
- Phone alerts for power loss and Wi-Fi loss.
- Stainless steel pumps with a 5-year warranty.
Cons
- Needs a basin at least 15 in wide.
- The WSB1275 battery is sold separately.
- Figures come from the listing, with no published curve.
Alternatives worth comparing



Final verdict
The WBPS50 is a sensible all-in-one upgrade when the old primary is due anyway and you want remote warnings. Confirm the 15 in basin first, budget for the WSB1275 battery, and size the primary on your real lift rather than the 5,100 GPH headline.
Where to buy
Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions buyers ask
Is the battery included with the Wayne WBPS50?
No. The box holds the primary pump, the DC backup pump with its vertical float, the controller and a battery box. Wayne pairs the system with its WSB1275, a 12 V, 75 amp-hour sealed lead-acid battery, which is sold separately.
What happens to the alerts if my Wi-Fi goes down?
The WBPS50 sends an alert that the connection was lost, keeps recording pump activity on the controller, and uploads the stored data when Wi-Fi returns. A built-in siren also sounds during a power outage, so you still get a local warning.
How much water can the backup pump move on battery?
Wayne's listing says up to 10,000 gallons on a single charge of the WSB1275. How many hours that lasts depends on how fast water enters your pit and how high the pipe climbs, so a cold battery or heavy inflow will cut it.
Will the WBPS50 fit my sump pit?
Wayne says it fits basins 15 in in diameter or larger. Measure the inside of the pit at the narrowest point, including any ribs or pipe entries. A smaller pit needs a slimmer combo or a backup mounted above the primary.
