Why it matters
This small AgiiMan pump draws through mesh screens on all four sides and is rated at up to 850 GPH from a 75 W motor, with about 3.2 m (10.5 ft) of maximum head.
It comes with a 16 ft drainage hose and garden hose nozzles, and has a 25 ft cord. A built-in temperature cutout protects it if it runs dry.
Who it's for, and who should skip it
Good fit if
- Above-ground pool covers
- Tarps and boat covers
- Tight budgets
Look elsewhere if
- Basement sump pits
- Dirty water with debris
- Draining a whole pool fast
Pros and cons
Pros
- Hose included
- Cheap
- 25 ft cord
Cons
- Low flow
- Manual
- Not for floods
Limitations to weigh
- On a pool cover, set the pump at the lowest point and keep the strainer clear of leaves.
- Manual pumps run only while switched on; stay with the pump so it doesn't run dry.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Material | Acrylonitrile Butadiene Styrene (ABS) | Retailer |
|---|---|---|
| Dimensions (seller) | 16"L x 4"W x 4"H | Retailer |
| Product weight | 2 lb | Retailer |
| Max flow (maker) | 14.16 GPM | Retailer |
| Voltage | 120 V | Retailer |
| Horsepower | 1/10 HP | Retailer |
| Model number | 01 | Retailer |
| Power cord | 25 ft power cord | Retailer |
Alternatives worth comparing
More utility & transfer pumps we cover
Final verdict
A cheap way to keep a cover clear.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure


