Why it matters
The SUP54 is a 1/6 HP thermoplastic utility pump with a continuous-duty 115 V PSC motor, which ECO-FLO says uses less energy.
ECO-FLO lists it for flooded basements, window wells, spas, cisterns and sumps, with about 20 ft of head.
Who it's for, and who should skip it
Good fit if
- Spas and cisterns
- Window wells
- Longer pumping runs
Look elsewhere if
- Permanent sump pits (a sump pump with a switch suits better)
- Sewage or grey water with solids
- Unattended running on manual models
Pros and cons
Pros
- Continuous duty
- PSC motor
- Corrosion resistant
Cons
- Few published specs here
- Low flow
- Manual operation
Limitations to weigh
- Manual pumps run only while switched on; stay with the pump so it doesn't run dry.
- Rated flow is at little or no lift; through a garden hose or up a stairwell, expect much less.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Material | Thermoplastic | Retailer |
|---|---|---|
| Max head / lift (maker) | 20 ft | Retailer |
| Voltage | 115 V | Retailer |
| Model number | PUP62 | Retailer |
| Housing | thermoplastic | Retailer |
Alternatives worth comparing
More utility & transfer pumps we cover
Final verdict
A solid small pump for longer runs.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Prices change often; the button shows today's price.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions buyers ask
Is it continuous duty?
Yes, per ECO-FLO.
What motor does it use?
A 115 V PSC motor.