12 V backup sump system · Liberty Pumps

Liberty Pumps 441 Battery Back-Up Sump Pump System

The Liberty Pumps 441 is a 12 V battery backup sump pump system with a vertical float switch, a check valve built into the pump and a charger, good for up to 18 ft of vertical pumping distance.

Model 441 · part number 441 · Updated November 2026

Max head
18 ft (5.5 m) maximum vertical pumping distance
Liquid
Clear water only, no hotter than 104 °F (40 °C)
Voltage
12 V DC submersible pump with 12 V charger
Battery
12 V marine deep-cycle, group 27 or 31, AGM or wet cell; not included
Switch type
Automatic, mercury-free vertical float switch

Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Quick verdict

In short

The 441 makes sense beside a Liberty primary such as the 257 or 237, where it is also the backup half of several PC combos. It keeps the build simple: a vertical float, a valve in the pump and a 12 V lead-acid battery you choose yourself. Liberty publishes no flow figure for it in the saved documents, and its lift limit sits below the stronger 442.

Who it fits, and who should skip it

A good fit if

  • Your main pump is a Liberty and you want the matching backup.
  • Your vertical lift is comfortably under 18 ft.
  • You prefer a vertical float to a tethered one in a tight pit.
  • You want to choose between an AGM and a wet-cell battery.

Look elsewhere if

  • You need a published flow-at-lift figure to size against storm inflow.
  • Your discharge climbs close to or beyond 18 ft.
  • You want remote alerts; the 442 NightEye versions cover that.

Specifications

Performance

Max head18 ft (5.5 m) maximum vertical pumping distance
Max flowNot stated in the saved maker documents
LiquidClear water only, no hotter than 104 °F (40 °C)

Figures: Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442).

Power

Voltage12 V DC submersible pump with 12 V charger
Battery12 V marine deep-cycle, group 27 or 31, AGM or wet cell; not included
Batteries to avoidAutomobile batteries (not recommended) and lithium-ion (never charge)

Figures: Amazon listing B0038RK5JI, Liberty Pumps 441 battery back-up system; Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442).

Switch

Switch typeAutomatic, mercury-free vertical float switch

Figures: Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442); Amazon listing B0038RK5JI, Liberty Pumps 441 battery back-up system.

Build

Check valveIntegrated in the 441 pump outlet
DischargePC-Series combos join 1-1/2 in PVC; do not reduce below 1-1/4 in
In the box12 V pump, float switch, control panel, battery box, 12 V charger
Weight13 lb (listing)

Figures: Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442); Amazon listing B0038RK5JI, Liberty Pumps 441 battery back-up system.

Install

CO detector spacingAt least 15 ft from the battery charger
Pit for PC combosAt least 15 in diameter and 18 in deep above the pump's resting surface

Figures: Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442).

Support

Warranty3 years from purchase on wholesale products, batteries excluded

Figures: Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442); Liberty Pumps wholesale limited warranty.

Versions

The 441 is sold as a stand-alone backup kit; Liberty also builds it into PC-Series combos with a primary pump.

VersionPart numberWhat differsListing
441 battery backup system44112 V pump with vertical float, control panel, battery box and charger; no batteryView on Amazon

Figures: Amazon listing B0038RK5JI, Liberty Pumps 441 battery back-up system; Liberty Pumps installation manual 4428000H, PC-Series sump pump combo series (441 and 442).

Installation and setup

The 441 goes into a pit that already has a working primary pump. Keep the float where it can travel freely, away from the pit wall, the piping and the stream from the drain tile, and make sure the primary pump has its own check valve: Liberty requires one there so water cannot cycle back into the pit. The backup's valve is already inside the pump outlet.

Treat the battery and charger as the delicate part. Liberty asks for the battery box on a shelf or a pad of plywood or 2x4s rather than bare concrete, in a dry spot that cannot flood, and for the charger to sit as far from the battery as the cables allow, never directly above it. Keep any carbon monoxide detector at least 15 ft from the charger to avoid nuisance alarms.

If you would rather fit one assembly, the 441 is the backup in Liberty's PC237-441, PC257-441, PC457-441 and PCS37-441 combos, which come with the check valves fitted and want a pit at least 15 in across.

Switch and sizing notes

A vertical float rides up a short rod and switches the pump without mercury. Because it moves straight up and down, it needs less side room than a tethered float, which helps when the primary already fills most of the pit.

Sizing starts with height. Liberty caps the 441 system at 18 ft of vertical pumping distance, against 21 ft for the 442, so measure from the pit floor to the highest point of the discharge before choosing. Liberty's saved documents give no gallons-per-minute curve for the 441, so you cannot match its flow to your inflow on paper; if your pit fills quickly in storms, a backup with published flow is the safer choice. The guide to battery and water-powered backups and the runtime calculator help with the rest.

Ownership and maintenance

Battery choice decides how long the 441 runs. Liberty recommends a 12 V marine-type deep-cycle battery in group 27 or group 31, AGM or wet cell, and notes that a group 27 gives the same performance as a group 31 for a shorter time. A car battery can need recharging after only an hour or two of steady use and wears out early under repeated cycling.

Never charge a frozen battery, keep sparks and flames away from it, and wear eye and hand protection around the acid. Liberty's wholesale warranty runs three years from purchase but leaves batteries out, so plan on replacing the battery on its own schedule and keep the dated receipt with the serial number.

Pros and cons

Pros

  • Vertical float suits a crowded pit.
  • Check valve already built into the pump.
  • Takes group 27 or group 31, AGM or wet cell.
  • Same backup Liberty uses in its PC combos.

Cons

  • No published flow figure in the saved maker documents.
  • Lift limit of 18 ft, below the 442's 21 ft.
  • No remote alerting on the stand-alone kit.

Alternatives worth comparing

Final verdict

Choose the Liberty 441 as a plain, well-matched backup for a Liberty primary in a pit with a modest lift. If your discharge climbs high, inflow is heavy or you want alerts while away, step up to the 442 combos or a backup with a published flow table.

Where to buy

Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How high can the Liberty 441 pump water?

Liberty gives a maximum vertical pumping distance of 18 ft for the 441 system. The 442 reaches 21 ft. Measure from the pit floor to the highest point of the discharge pipe, and leave some margin, since flow drops off well before the limit.

What battery does the 441 need?

A 12 V lead-acid marine deep-cycle battery, group 27 or group 31, in AGM or wet-cell form. The battery is not in the box. Do not use a lithium-ion battery with the charger, and avoid a car battery, which Liberty says can fail early.

Does the 441 need its own check valve?

The 441 pump has a check valve built into its outlet. Liberty still requires a separate check valve on the primary pump's discharge so water cannot run back into the pit when that pump stops.

What separates the 441 from the 442?

The 441 uses a vertical float and is rated for 18 ft of vertical pumping distance. The 442 uses a snap-on float and reaches 21 ft, and it is the backup in the NightEye combos that can send alerts.