Why it matters
Flotec E75STVT 3/4 HP Professional Sewage Pump: 3/4 HP, 170 gpm. A professional-series 3/4 HP sewage pump for heavier duty.
Flotec lists the E75STVT at 170 gpm from a 3/4 HP, 115 V PSC motor with a 10 ft cord, a 2 in NPT discharge and 2 in maximum solids; it takes a 1-1/2 in line for effluent use.
Who it's for, and who should skip it
Good fit if
- Busy below-grade bathrooms
- Effluent and sewage use
- Owners who want 3/4 HP
Look elsewhere if
- Small budgets
- Light-duty drains
Pros and cons
Pros
- 170 gpm
- PSC motor
- Rust-proof impeller
Cons
- Highest price here
- Plumber install
- Needs a 2 in line for sewage
Limitations to weigh
- Sewage and grinder installations usually need a licensed plumber and a sealed, vented basin to meet code.
- Fit a check valve on the discharge so water in the pipe doesn't fall back into the pit after each cycle.
- Maximum head is where flow drops to zero; at your lift the pump moves less than its maximum flow. Size it with the sizing calculator.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Price | $603.90 | Retailer |
|---|---|---|
| Model number | E75STVT | Retailer |
| Horsepower | 3/4 HP | Retailer |
| Max flow (maker) | 170 GPM | Retailer |
| Voltage | 115 V | Retailer |
| Solids handling (maker) | 2 in | Retailer |
| Power cord | 10 ft | Retailer |
| Housing | Cast iron | Retailer |
Alternatives worth comparing
More sewage & effluent pumps we cover
Final verdict
A professional-series 3/4 HP sewage pump for heavier duty; check it against your well, basin or tank before you buy.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure