Why it matters
The FLO300 drains sinks, showers, tubs and laundry where there's no gravity drain. Its 350 W copper motor lifts water 23 ft, and VEVOR says the oil-filled motor handles 75 C water continuously.
Three inlets connect several fixtures, a built-in check valve prevents backflow, and four pads reduce noise.
Who it's for, and who should skip it
Good fit if
- Laundry sinks
- Basement showers
- Wet bars
Look elsewhere if
- Toilets
- High lifts
Pros and cons
Pros
- Built-in check valve
- Three inlets
- Low price
Cons
- Gray water only
- Unproven long-term
- Check local code
Limitations to weigh
- Gray water pumps can't take toilet waste.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Material | PP-GF20 | Retailer |
|---|---|---|
| Dimensions (seller) | 11.8"L x 6.5"W x 7.1"H | Retailer |
| Product weight | 11.5 lb | Retailer |
| Max head / lift (maker) | 23 ft | Retailer |
| Voltage | 110 V | Retailer |
| Horsepower | 0.47 HP | Retailer |
| Model number | FLO300 | Retailer |
Alternatives worth comparing
More sewage & effluent pumps we cover
- Little Giant 6-CIA-ML Under-Sink Pump
- Simer 2925B Laundry Sink Pump
- Zoeller 105 Drain Pump System
- Wassermann 4TMS 1 HP Septic Effluent Pump
All sewage & effluent pumps, compared in one table · Every VEVOR product we cover
Final verdict
A cheap fix for draining a basement sink or shower.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure