Why it matters
Aerobic septic systems pump clarified effluent to spray heads, which takes high pressure. The 4TMS is a 1 HP, 4 in submersible rated at 32 GPM and 207 ft of head, with bottom suction and a stainless intake screen.
It's stainless steel with a hermetically sealed, thermally protected motor and a built-in capacitor start, and it discharges through 1-1/4 in FNPT.
Who it's for, and who should skip it
Good fit if
- Aerobic septic systems
- Septic sprinklers
- High-head effluent
Look elsewhere if
- Raw sewage (use an ejector)
- Clean-water sump pits
Pros and cons
Pros
- 207 ft head
- Bottom suction
- Stainless
Cons
- Lesser-known brand
- Professional install usually
- Clarified effluent only
Limitations to weigh
- Sewage and grinder installations usually need a licensed plumber and a sealed, vented basin to meet code.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Material | Stainless Steel | Retailer |
|---|---|---|
| Max flow (maker) | 32 GPM | Retailer |
| Max head / lift (maker) | 207 ft | Retailer |
| Voltage | 115 V | Retailer |
| Horsepower | 1 HP | Retailer |
| Model number | 4TMS5.8 | Retailer |
| Discharge | 1-1/4" FNPT | Retailer |
| Housing | stainless steel | Retailer |
Alternatives worth comparing
More sewage & effluent pumps we cover
Final verdict
Built for the high pressure aerobic systems need.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure