Sewage ejector · Wayne

Wayne RPP50 Sewage Pump

A budget-friendly cast iron ejector

Updated October 2026

Quick verdict

Strong value for a replacement.

Strength
Cast iron at a low price.
Trade-off
One-year warranty.
Right buyer
Replacing an existing ejector.
Horsepower
1/2 HP
Max flow (maker)
103 GPM
Max head / lift (maker)
10 ft
Power source
Corded Electric
Dimensions (seller)
9.5"L x 6"W x 14"H
Product weight
21 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The RPP50 is a 1/2 HP cast iron sewage pump with a piggyback tether float, so it can run automatically or be switched to manual. Wayne rates it at up to 6,200 GPH, with a 2 in NPT discharge that passes 2 in solids.

Wayne says it replaces most sewage pumps without plumbing changes, in basins 18 in or wider.

Who it's for, and who should skip it

Good fit if

  • Replacing an ejector
  • 18 in or larger basins
  • Budget-minded owners

Look elsewhere if

  • Clean-water sump pits (a sump pump is cheaper)
  • Septic tanks unless the maker allows it
  • DIY installs where code requires a plumber
  • Narrow basins

Pros and cons

Pros

  • Cast iron
  • Piggyback float
  • Low price

Cons

  • One-year warranty
  • Tether needs room
  • Professional install usually

Limitations to weigh

  • Sewage pumps need a sealed, vented basin, usually 18 in or wider; size the basin to the pump's switch range.
  • Sewage and grinder installations usually need a licensed plumber and a sealed, vented basin to meet code.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

MaterialCast IronRetailer
Dimensions (seller)9.5"L x 6"W x 14"HRetailer
Product weight21 lbRetailer
Max flow (maker)103 GPMRetailer
Max head / lift (maker)10 ftRetailer
Horsepower1/2 HPRetailer
Model numberRPP50Retailer
Warranty1 Year LimitedRetailer

Alternatives worth comparing

More sewage & effluent pumps we cover

All sewage & effluent pumps, compared in one table · Every Wayne product we cover

Final verdict

A low-cost, drop-in replacement ejector.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What basin size does it need?
18 in diameter or larger, per Wayne.
Does it handle 2 in solids?
Yes, through its 2 in NPT discharge.