Why it matters
Flotec FP2211 1/2 HP 115V Deep Well Submersible Pump: 1/2 HP, 115 V, 150 ft head. A 115 V deep-well submersible for homes without a 230 V circuit.
Flotec lists the FP2211 as a 1/2 HP, 115 V, single-phase 4 in submersible with 150 ft of maximum head, a floating-stack design for sand resistance and a stainless steel pump and motor housing.
Who it's for, and who should skip it
Good fit if
- 4 in wells
- Homes with 115 V only
- Depths to about 150 ft
Look elsewhere if
- Very deep wells
- 230 V systems (see FP2212)
Pros and cons
Pros
- 115 V
- Stainless housing
- Sand-resistant floating stack
Cons
- 150 ft head limit
- High current at 115 V
- Needs a pro install
Limitations to weigh
- Well pumps usually need a licensed installer, the right wire size and a pressure tank sized to the pump.
- Check whether your circuit is 115 V or 230 V before ordering; many well pumps are wired for 230 V.
- Maximum head is where flow drops to zero; at your lift the pump moves less than its maximum flow. Size it with the sizing calculator.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Price | $603.53 | Retailer |
|---|---|---|
| Model number | FP2211-13 | Retailer |
| Horsepower | 1/2 HP | Retailer |
| Voltage | 115 V | Retailer |
| Max head / lift (maker) | 150 ft | Retailer |
| Well depth (maker) | 4 in and larger wells, from 150 ft | Retailer |
| Housing | Stainless steel | Retailer |
Alternatives worth comparing
More well pumps & tanks we cover
Final verdict
A 115 V deep-well submersible for homes without a 230 V circuit; check it against your well, basin or tank before you buy.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure