Why it matters
Flotec FP2212 1/2 HP 230V 2-Wire Deep Well Submersible Pump: 1/2 HP, 230 V 2-wire, 150 ft head. The 230 V 2-wire version of Flotec's 1/2 HP submersible.
The FP2212 is a 1/2 HP, 230 V, 2-wire 4 in submersible rated up to 10 gpm with 150 ft of maximum head; the 2-wire design needs no separate control box.
Who it's for, and who should skip it
Good fit if
- 4 in wells
- 230 V circuits
- Depths to about 150 ft
Look elsewhere if
- 115 V-only homes (see FP2211)
- Very deep wells
Pros and cons
Pros
- 2-wire, no control box
- Up to 10 gpm
- Stainless housing
Cons
- 150 ft head limit
- 230 V only
- Needs a pro install
Limitations to weigh
- Well pumps usually need a licensed installer, the right wire size and a pressure tank sized to the pump.
- Check whether your circuit is 115 V or 230 V before ordering; many well pumps are wired for 230 V.
- Maximum head is where flow drops to zero; at your lift the pump moves less than its maximum flow. Size it with the sizing calculator.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Price | $607.23 | Retailer |
|---|---|---|
| Model number | FP2212-13 | Retailer |
| Horsepower | 1/2 HP | Retailer |
| Voltage | 230 V, 2-wire | Retailer |
| Max head / lift (maker) | 150 ft | Retailer |
| Max flow (maker) | Up to 10 gpm | Retailer |
| Housing | Stainless steel | Retailer |
Alternatives worth comparing
More well pumps & tanks we cover
Final verdict
The 230 V 2-wire version of Flotec's 1/2 HP submersible; check it against your well, basin or tank before you buy.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure