Why it matters
The 9013FSG2J24 is Schneider Electric's Square D Pumptrol 40/60 switch, sold under the Telemecanique name: the pump starts at 40 psi and stops at 60 psi, for stronger household pressure than a 30/50 setting.
It fits pumps with a 1/4 in FNPS port operating in the 5 to 65 psi range.
Who it's for, and who should skip it
Good fit if
- 40/60 systems
- Replacing a worn switch
- Higher household pressure
Look elsewhere if
- 30/50 systems with a smaller pump
- Owners not comfortable with line-voltage wiring
Pros and cons
Pros
- Genuine OEM
- 40/60 setting
- Widely used
Cons
- Line-voltage wiring
- Pump must reach 60 psi
- Contacts wear
Limitations to weigh
- Turn the power off at the breaker before opening a pressure switch; the contacts carry line voltage.
- Set the tank's air pre-charge 2 psi below the pump's cut-in pressure (28 psi for a 30/50 switch, 38 psi for 40/60) with the water off.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Amps | 40 A | Retailer |
|---|---|---|
| Voltage | 240 V | Retailer |
| Switch | Pressure switch | Retailer |
| Material | Metal | Retailer |
| Dimensions (seller) | 9 x 5 x 4 inches | Retailer |
| Mounting / installation | Pump Mount or Flange Mount | Retailer |
| Wattage | 2960 watts | Retailer |
| Compatible devices | Water pumps with 1/4 inch FNPS port and operating within 5 to 65 psi range | Retailer |
| Product weight | 1.6 ounces | Retailer |
Alternatives worth comparing
More well pumps & tanks we cover
Final verdict
The right switch for a 40/60 system.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Prices change often; the button shows today's price.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions buyers ask
Is this the same as the Square D FSG2J24?
Yes, Schneider Electric sells the Square D Pumptrol switch under the Telemecanique name.
What range does it run?
Cut-in 40 psi, cut-out 60 psi.