Best-of list ยท Well pumps

Best well pressure tanks

The pressure tank decides how often your well pump starts. These five diaphragm tanks cover small cabins to busy family homes.

By Pumpendium Editorial · Updated November 2026

A well pressure tank stores water under air pressure, so the pump can rest while you draw small amounts. The number that matters is drawdown: the gallons the tank delivers between the pump switching off and switching back on. More drawdown means fewer pump starts and a longer pump life, while too little leaves the pump cycling every time someone fills a glass.

All five picks are pre-charged diaphragm tanks with a 1 in connection, built for drinking water. Amtrol publishes drawdown at each common switch setting, which makes its tanks easy to size. Work through well pressure tank sizing before you choose, and set the pre-charge to match your pressure switch settings.

Qualifies if
  • Pre-charged diaphragm or liner design.
  • Rated for drinking water by the maker or listing.
  • A 1 in pipe connection.
  • Volume published by the maker or listing.
On the list
5 pumps

The picks

#1 · Most drawdown

Amtrol WX-203 Well-X-Trol Well Tank

Best for: Busy households and longer pump rest

Amtrol's WX-203 holds 32 gallons and delivers 9.9 gallons of drawdown at a 30/50 setting, falling to 7.6 at 50/70. It stands 47 in tall and 15 in across. Amtrol rates the Well-X-Trol line for 150 psig and gives it a seven-year warranty, but its policy voids support for tanks bought online, so buy it through a dealer.

#2 · Best compact Well-X-Trol

Amtrol WX-202 Well-X-Trol Pressure Tank

Best for: Smaller homes with limited headroom

The WX-202 is the 20 gallon size, 32 in tall, with 6.2 gallons of drawdown at 30/50 and 5.4 at 40/60. Like the WX-203 it uses a butyl diaphragm locked by Amtrol's hoop ring and an antimicrobial liner. The same internet sales policy applies: the seven-year warranty depends on dealer purchase.

#3 · Best mid-size tank

WaterWorker HT-30B Vertical Pressure Tank

Best for: Replacing an older 30 gallon tank

WaterWorker sells the HT-30B as a 30 gallon tank with 26 gallons of capacity, listed under NSF/ANSI Std 61. Its seamless butyl diaphragm flexes rather than stretching like a bladder, and a polypropylene liner keeps water off the deep-drawn steel domes. It ships pre-charged to 25 psi.

#4 · Best small tank

WaterWorker HT-20B 20-Gallon Well Tank

Best for: Cabins and small households

The HT-20B, sold under part number 25009, is the 20 gallon WaterWorker, 32 in tall and 15 in wide. It shares the HT line's butyl diaphragm, polypropylene liner and NSF/ANSI 61 listing, and arrives pre-charged to 25 psi, which you set 2 psi below the pump's cut-in pressure before installing.

#5 · Largest WaterWorker

WaterWorker HT-32B Pressure Tank

Best for: More storage without a Well-X-Trol

Amtrol's Water Worker HT-32B steps up to 32 gallons with a 1 in FNPT connection, for owners who want more stored water from the HT line. Amtrol's pre-charged tank instructions explain how to set its air charge before the tank is filled. Drawdown is not stated in the listing, so size it from the guide.

Side by side

PumpVolumeDrawdown at 30/50HeightWarranty
Amtrol WX-203 Well-X-Trol Well Tank32 gal9.9 gal47 in7 years (dealer purchase)
Amtrol WX-202 Well-X-Trol Pressure Tank20 gal6.2 gal32 in7 years (dealer purchase)
WaterWorker HT-30B Vertical Pressure Tank30 gal (26 gal capacity)Not stated in the listing39 inNot stated in the listing
WaterWorker HT-20B 20-Gallon Well Tank20 galNot stated in the listing32 inNot stated in the listing
WaterWorker HT-32B Pressure Tank32 galNot stated in the listingNot stated in the listingNot stated in the listing

Figures: Amtrol Well-X-Trol specification card MC7025; Amtrol limited warranty and internet sales policy MC10253; WaterWorker HT-30B listing; WaterWorker HT-20B (25009) listing; Water Worker HT-32B listing.

How the list was narrowed

All pressure tanks on this site were compared on total volume, published drawdown at 30/50, 40/60 and 50/70 switch settings, height, working pressure, materials and warranty terms. A tank whose seller says it is not for drinking water was excluded. The five picks span the range from small installs to larger households, with one leading in each size class.

Who should skip this list

Skip a well tank if you are on city water and only need to absorb thermal expansion from a water heater; that is an expansion tank's job. Some budget tanks, such as one 14 gallon model on this site, are sold as not suitable for drinking water and belong only on irrigation or utility systems.

Final recommendation

Size the tank first, then pick a maker. If you can buy through a dealer, the Well-X-Trol WX-203 gives the most drawdown and the longest warranty, and the WX-202 does the same in a shorter tank. Where online purchase matters, the WaterWorker HT-30B, HT-20B and HT-32B cover mid, small and larger sizes with the same diaphragm design.

Questions readers ask

What size pressure tank do I need for my well?

Aim for at least one minute of pump run time per cycle. Multiply your pump's flow by the minimum run time, then pick a tank whose drawdown at your switch setting meets that figure. Amtrol's tables, such as 9.9 gallons for the WX-203 at 30/50, make this simple.

What should the air pre-charge be?

Set it about 2 psi below the pump's cut-in pressure, measured with the tank empty of water. For a 30/50 switch, that means 28 psi. Tanks ship pre-charged, such as 25 psi for WaterWorker, so check and adjust before filling.

Does buying a Well-X-Trol online affect the warranty?

According to Amtrol's internet sales policy, Well-X-Trol tanks bought from an online source are not eligible for manufacturer support, including warranty coverage. Buy through a local dealer if the seven-year warranty matters to you.

How do I know if my pressure tank has failed?

Signs include the pump starting every few seconds while a tap runs, a tank that sounds full of water when you knock on the top, or water coming from the air valve when you press it. Any of these suggests a lost air charge or a ruptured diaphragm.

Can I add a second pressure tank instead of replacing the first?

Yes. Tanks can be joined on a common header to add drawdown, which is useful when the space is too low for one tall tank. Each must have the same air pre-charge, set while it is empty of water.

How we research · Disclosure