Why it matters
The SEC075V steps up to 3/4 HP, rated at up to 6,400 GPH and 29 ft of lift. It shares the SEC050V's vertical float (on at 14.5 in, off at 6.3 in), vortex impeller, 2 in NPT discharge and 2 in solids handling.
Choose it when the discharge has to climb higher or travel farther than a 1/2 HP pump comfortably handles.
Who it's for, and who should skip it
Good fit if
- Higher lifts
- Longer discharge runs
- Budget installs
Look elsewhere if
- Clean-water sump pits (a sump pump is cheaper)
- Septic tanks unless the maker allows it
- DIY installs where code requires a plumber
Pros and cons
Pros
- 29 ft lift
- Vertical float
- 2 in solids
Cons
- Lesser-known brand
- Not for septic tanks
- Professional install usually
Limitations to weigh
- Sewage pumps need a sealed, vented basin, usually 18 in or wider; size the basin to the pump's switch range.
- Sewage and grinder installations usually need a licensed plumber and a sealed, vented basin to meet code.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Material | Cast Iron | Retailer |
|---|---|---|
| Max head / lift (maker) | 29 ft | Retailer |
| Voltage | 115 V AC | Retailer |
| Horsepower | 3/4 HP | Retailer |
| Model number | SEC075V | Retailer |
| Switch | Vertical float switch | Retailer |
| Housing | cast iron | Retailer |
Alternatives worth comparing
More sewage & effluent pumps we cover
- Wayne RPP50 Sewage Pump
- Superior Pump 93501 Cast Iron Sewage Pump
- Red Lion 14942748 1/2 HP Cast Iron Sewage Pump $307.56
- Liberty Pumps LE51A Sewage Pump
All sewage & effluent pumps, compared in one table · Every Acquaer product we cover
Final verdict
Extra lift for a modest price.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure