Quick verdict
The Saniswift Pro is the laundry-room member of Saniflo's gray water range: more motor than the Sanishower, a top vent and several inlets, so a utility sink and washer can share one unit. It stays quiet enough for a finished basement. It still takes no toilet waste, and its listing quotes two different flow figures.
Who it fits, and who should skip it
A good fit if
- A laundry sink and washing machine sit below the nearest drain.
- You want a quiet unit inside a cabinet or beside the washer.
- Your discharge climbs no more than about one storey.
Look elsewhere if
- A toilet will feed the same pump.
- Your drain line must climb higher than 14 ft.
Specifications
Motor
| Horsepower | 1/3 HP (spec row: 0.3 hp) |
|---|---|
| Voltage | 120 V |
Figures: Amazon listing B09RKSB4CV.
Performance
| Max flow | Up to 24 GPM (bullet); 18 GPM (spec row) |
|---|---|
| Max head | 14 ft vertical |
| Horizontal reach | 140 ft |
| Noise | 44 dBA |
Figures: Amazon listing B09RKSB4CV.
Use
| Waste handled | Gray water: laundry sinks, washers and showers |
|---|---|
| Inlets and vent | Multiple low inlets; top vent connection |
| Backflow | Non-return valve |
Figures: Amazon listing B09RKSB4CV.
Build
| Housing | White plastic |
|---|---|
| Dimensions | 11.25 in L x 9.75 in W x 12.25 in H |
| Weight | 16 lb |
| Listings | CSA (IPC, NSPC) per the listing title |
| Warranty | Listing title: 4 years; warranty row: 3 years |
Figures: Amazon listing B09RKSB4CV.
Versions
One version of the Saniswift Pro is listed, Saniflo model 022, sold as the pump unit.
| Version | Part number | What differs | Listing |
|---|---|---|---|
| Saniswift Pro, 120 V | 022 | Gray water pump with non-return valve and top vent | View on Amazon |
Figures: Amazon listing B09RKSB4CV.
Installation and setup
Set the Saniswift Pro on a level floor beside or beneath the fixtures it serves. Its inlets are low, so a laundry sink's trap or a washer standpipe can drop into it without lifting the unit on a platform, and it fits inside many sink cabinets. Every drain pipe needs a steady fall toward the inlets.
The top vent is there to connect to the house vent system, which lets air in and out as the chamber fills and empties and keeps drain odors in the pipes. Lead the discharge upward first, then let it fall to the stack. The built-in non-return valve stops pumped water draining back, so a separate check valve is not normally needed.
Saniflo's instructions in the carton govern the details, including how the washer hose connects and which outlet suits the unit. Plug into a protected outlet that matches the 120 V rating.
Switch and sizing notes
The pump runs automatically whenever water enters the chamber and stops when it has emptied. The listing does not describe the switch or its levels.
Reach figures are the main guide: 14 ft straight up or 140 ft across, with height eating into horizontal distance. Flow is quoted twice, as up to 24 GPM in the description and 18 GPM in the specification table, without a curve. A washer pumps out at a steady rate for a minute or more, so keep the lift short to stay well inside the unit's range. The sink and laundry drain guide sets these compact pumps beside basin systems.
Ownership and maintenance
Lint is the long-term risk in a laundry pump. Fit a lint trap on the washer hose and clean the chamber whenever the pump starts to sound labored. Soap scum and hair from a shower add to the same build-up, so a strainer at each drain pays off.
The saved listing states the warranty two ways: four years in the title, three in the warranty field. Register the unit with Saniflo and keep proof of purchase, then confirm the term that applies.
Pros and cons
Pros
- Stronger motor than the Sanishower for laundry use.
- Quiet 44 dBA rating.
- Top vent and built-in non-return valve.
- Low inlets suit cabinets and standpipes.
Cons
- Gray water only, no toilet.
- Flow and horsepower stated two ways.
- Limited to 14 ft of vertical lift.
Alternatives worth comparing



Final verdict
Pick the Saniswift Pro when a laundry sink and washer need a quiet, compact pump close to the drain. It has the motor and vent that laundry calls for. If a toilet enters the plan, step up to a macerator; for heavy surges, a basin system gives more buffer.
Where to buy
Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions buyers ask
Can the Saniswift Pro drain a washing machine?
Yes. Saniflo positions it for laundry rooms, handling gray water from laundry sinks and washers as well as showers. Keep the discharge lift short and add a lint trap so fibers do not collect in the chamber.
How does it differ from the Sanishower?
The Saniswift Pro has a 1/3 HP motor against the Sanishower's 0.2 HP, with more listed reach: 14 ft up or 140 ft across, compared with 12 ft and 100 ft. Both carry a 44 dBA noise rating.
Does the Saniswift Pro need a vent?
It has a top vent connection, and venting lets air move as the chamber fills and empties while keeping odors in the plumbing. Follow Saniflo's instructions and local code for how the vent connects.
Is the flow 18 or 24 GPM?
The listing gives both, 24 GPM in a bullet and 18 GPM in the specification row, with no curve. Plan around the lower figure, which is still comfortable for a laundry sink and a typical washer.
