Quick verdict
The 92751 is for basements where a 1/3 or 1/2 HP pump keeps losing the race: tall discharge runs, fast-filling pits or long lines to the yard. Its curve stays strong well past the heights that stall smaller pumps. The cost is a larger 2 in outlet, more weight and a series manual that leaves switch levels unstated.
Who it fits, and who should skip it
A good fit if
- Your pipe climbs 15 ft or more and you still want about 61 GPM at that height.
- Heavy spring inflow refills the pit before a smaller pump can empty it.
- You want a continuous-duty, thermally protected motor in a stainless and cast iron body.
Look elsewhere if
- Your pit is small or crowded, since the vertical float needs a clear path from bottom to top.
- You only lift water a few feet; a 1/3 HP pump will do that with fewer amps.
Specifications
Motor
| Horsepower | 3/4 HP |
|---|---|
| Voltage | 120 V, 60 Hz |
| Motor type | Continuous duty, split capacitor, thermally protected |
| Circuit | 15 A minimum |
Figures: Superior Pump stainless steel sump pump owner's manual (2015), models 92581 to 92151.
Performance
| Max flow | 80 GPM at 0 ft |
|---|---|
| Max head | 2 GPM still listed at 45 ft in the maker's table |
| Flow at 10 ft | 69 GPM |
| Flow at 20 ft | 55 GPM |
| Flow at 30 ft | 38 GPM |
| Flow at 40 ft | 16 GPM |
Figures: Superior Pump stainless steel sump pump owner's manual (2015), models 92581 to 92151.
Switch
| Switch type | Vertical float switch with piggyback plug |
|---|---|
| On / off levels | Not stated on the data sheet |
Figures: Amazon listing B00MSBGL70; Superior Pump stainless steel sump pump owner's manual (2015), models 92581 to 92151.
Build
| Discharge | 2 in NPT, with a 2 in MNPT x 1-1/2 in MNPT adapter |
|---|---|
| Solids handling | 1/2 in |
| Construction | Stainless steel and cast iron |
| Liquid temperature | 32 °F to 120 °F (0 °C to 49 °C) |
| Power cord | 10 ft, with piggyback switch plug |
| Weight | 24.5 lb (listing) |
| Warranty | 3 years |
Figures: Superior Pump stainless steel sump pump owner's manual (2015), models 92581 to 92151; Amazon listing B00MSBGL70.
Versions
Superior sells this motor and housing as the 92751. The same manual groups the 92731 with it on one performance row but does not say how the two differ, so only the 92751 is listed here.
| Version | Part number | What differs | Listing |
|---|---|---|---|
| 92751, vertical float, 120 V | 92751 | 3/4 HP, 2 in NPT outlet with adapter, 10 ft cord, piggyback vertical float | View on Amazon |
Figures: Superior Pump stainless steel sump pump owner's manual (2015), models 92581 to 92151; Amazon listing B00MSBGL70.
Installation and setup
Before the new pump goes in, Superior asks for the old piping to come out and the basin to be cleared of dirt and debris. Stand the 92751 on a solid base at the bottom of the pit, set off to one side, and never directly on soil, sand or stones, which can jam or wear the impeller. A grounded 120 V outlet should sit within 6 ft of the basin, and the maker strongly recommends a GFCI receptacle, wired by a qualified electrician.
The outlet is a full 2 in NPT. Superior includes a 2 in MNPT x 1-1/2 in MNPT adapter (part 99250) for houses already plumbed in the smaller size, but the manual's advice is to keep pipe at least as large as the outlet, because a reduction lowers output without harming the pump. Fit a full-flow swing check valve of matching size as close to the pump as possible, then run schedule 40 PVC; DWV or ABS also work because the line is not under pressure.
Switch and sizing notes
The 92751 runs from a vertical float with a piggyback plug: the pump cord plugs into the back of the switch plug, and that pair goes into the wall. With everything plugged in and the pit dry, the pump should stay off; if it runs, the float is stuck up or the pump has been plugged straight into the outlet. Pour in water until the float rises and the pump starts, and watch it shut off when the float drops. Superior does not print on and off heights for this model, so judge the cycle in your own pit.
The curve is the reason to buy it. Superior lists 80 GPM at zero lift, 69 GPM at 10 ft, 55 GPM at 20 ft and 38 GPM at 30 ft, falling to 16 GPM at 40 ft. The sizing calculator does that arithmetic for you, and how to size a sump pump explains why a high-horsepower pump in a short lift can short-cycle.
Ownership and maintenance
If it starts and stops too often, water is draining back down the discharge, so add or replace the check valve. If it runs but moves little water, look at the intake screen, a frozen or blocked line, a check valve fitted backwards, or an air lock; the manual says to clear the anti-airlock hole with a paper clip or pipe cleaner.
Replacement parts are sold by number, including the vertical float switch 92010, its bracket 99104 and the intake screen 99163. Superior covers the pump for 3 years.
Pros and cons
Pros
- Strong curve: 45 GPM still at 25 ft.
- Full 2 in outlet with an adapter included.
- Continuous-duty, thermally protected motor.
- Common replacement parts listed by number.
Cons
- Switch on and off heights are not published.
- Oversized for short, low lifts.
- Liquid limit of 120 °F is lower than many cast iron rivals.
Alternatives worth comparing



Final verdict
Buy the 92751 when lift height or inflow has beaten smaller pumps, since few home sump pumps hold this much flow at 25 or 30 ft. For an ordinary pit with a short climb, a 1/3 or 1/2 HP model is the more sensible, quieter choice.
Where to buy
Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions buyers ask
How high can the Superior 92751 pump water?
Superior's performance table runs to 45 ft, where it shows a trickle of 2 GPM; the retail listing quotes a 25 ft lift instead. For sizing, use the useful range: 45 GPM at 25 ft and 38 GPM at 30 ft are still strong figures for a home pit.
Can I connect the 92751 to existing 1-1/2 in pipe?
Yes. The box includes an adapter from the pump's 2 in thread down to 1-1/2 in. Superior notes that a smaller pipe will not hurt the pump but will cut its output, so if you are replumbing anyway, run full-size pipe and a matching swing check valve.
Why does water leak from the side of the pump while it runs?
That is the built-in anti-airlock device letting trapped air escape so the impeller can prime. Superior says leakage there is normal. If the pump ever hums without moving water, clean that opening with a paper clip or pipe cleaner before suspecting the motor.
Is the 92751 suitable for warm water?
The manual limits it to liquids between 32 °F and 120 °F, which covers groundwater and ordinary basement drainage. Let hot water from a heater or boiler drain cool before it reaches the pit.
