Quick verdict
Step up from the 1/2 HP J5S when a family home shares one shallow source. The J7S roughly doubles flow at 40 psi in mid-range lifts. Its curve still bends sharply at 50 psi, where it gives 9.6 GPM from 15 ft, so it rewards a tank and plumbing sized for the 30 to 40 psi range.
Who it fits, and who should skip it
A good fit if
- A family home on a shallow well, point or lake.
- Swapping out an older Goulds jet of the same size.
- Owners who value parts that come apart without cutting pipe.
Look elsewhere if
- Water that can drop below 25 ft.
- Systems that need high pressure at the far end of a long line.
Specifications
Motor
| Horsepower | 3/4 HP |
|---|---|
| Voltage | 115/230 V capacitor-start motor |
| Protection | Automatic-reset built-in overload; 3500 RPM |
Figures: Goulds JS shallow well jet pumps technical brochure BJS+ R4 (distributor copy); Amazon listing B00Y1GJNPW.
Performance
| Max flow | 21.3 GPM at 30 psi from a 5 ft lift |
|---|---|
| Max head | 70 psi shut-off from a 5 ft lift |
| 10 ft lift: 30 / 40 / 50 psi | 18.8 / 17.3 / 11.3 GPM; shut-off 68 psi |
| 15 ft lift: 30 / 40 / 50 psi | 16.4 / 15.5 / 9.6 GPM; shut-off 66 psi |
| 25 ft lift: 30 / 40 / 50 psi | 9.9 / 6.4 / 1.0 GPM at 40-50 psi; shut-off 59 psi |
Figures: Goulds JS shallow well jet pumps technical brochure BJS+ R4 (distributor copy).
Controls
| Switch type | AS4, factory set 30-50 psi |
|---|
Figures: Goulds JS shallow well jet pumps technical brochure BJS+ R4 (distributor copy).
Connections
| Discharge | 1 in NPT |
|---|---|
| Suction | 1-1/4 in NPT |
Figures: Goulds JS shallow well jet pumps technical brochure BJS+ R4 (distributor copy).
Build
| Nozzle and venturi | AN018 and AD3336 |
|---|---|
| Weight | 47 lb |
| Max water temperature | 140 °F |
| Warranty | One year from installation or 18 months from date code |
Figures: Goulds JS shallow well jet pumps technical brochure BJS+ R4 (distributor copy); Goulds jet pump installation manual IM102 (third-party copy).
Versions
The J7S shares its casing design with smaller and larger JS pumps; the nozzle and venturi change with the motor.
| Version | Part number | What differs | Listing |
|---|---|---|---|
| J7S, 3/4 HP | J7S | Nozzle AN018, venturi AD3336 | View on Amazon |
| J5S, 1/2 HP | J5S | Nozzle AN017, venturi AD3332 | Not linked |
| J10S, 1 HP | J10S | Nozzle AN018, venturi AD3339 | Not linked |
Figures: Goulds JS shallow well jet pumps technical brochure BJS+ R4 (distributor copy).
Installation and setup
Mount the pump on a firm base near the source, in a dry and frost-free space. Run the suction pipe at full 1-1/4 in size, larger if the horizontal offset exceeds 50 ft, and keep it level or rising toward the pump. A single high loop in the line can hold an air pocket that the jet cannot clear.
For a well of 2 in or more, hang a foot valve well clear of the bottom; for a driven point, an inline check valve close to the well head primes most easily. Thread a union into the suction port, or double-clamp poly pipe on a barbed adapter, and check every joint for air tightness.
Put a tee on the discharge with a plug or gauge in the top port as the priming point. Keep restrictive valves and filters out of the pipe between pump and tank; if a filter must go there, move the switch to the tank tee to stop chatter.
Switch and sizing notes
Goulds ships the J7S with an AS4 switch at 30/50 psi; the tank charge goes 2 psi below cut-in. Our tank sizing guide explains drawdown and why a larger tank suits a bigger jet.
The table shows where this motor pays off. From 15 ft the J7S gives 15.5 GPM at 40 psi, where the J5S gives 8.0 GPM. From 25 ft the two are much closer at 40 psi. So the J7S is the better buy for lifts up to about 20 ft; near the limit, look at the 1 HP J10S or a convertible pump.
Ownership and maintenance
Service is the JS series' strong suit. The motor and impeller slide out the back while the casing stays plumbed in, the nozzle has a clean-out plug, and the engineered plastic tubing unscrews by hand. A diaphragm keeps the seal wet even if the pump loses water.
Goulds covers it for one year from installation or 18 months from the date code, whichever ends first.
Pros and cons
Pros
- 15.5 GPM at 40 psi from a 15 ft lift.
- Back pullout and nozzle clean-out plug.
- Diaphragm protects the seal from running dry.
- Re-primes itself after the water returns.
Cons
- Flow drops hard above 40 psi.
- Warranty is limited to one year.
- Shallow sources within 25 ft only.
Alternatives worth comparing



Final verdict
The J7S is the JS model to pick for a family home where the water sits within about 20 ft. It doubles the small pump's flow at 40 psi in that range and keeps the series' easy service.
Where to buy
Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions buyers ask
How much water does the Goulds J7S deliver?
Goulds lists 21.3 GPM at 30 psi and 18.3 GPM at 40 psi from a 5 ft lift, and 16.4 and 15.5 GPM from 15 ft. From 25 ft it gives 9.9 GPM at 30 psi.
Is the J7S worth it over the J5S?
For lifts up to about 20 ft, yes: at 15 ft and 40 psi it gives 15.5 GPM against 8.0 GPM. Near 25 ft the gap narrows, and the J10S becomes the better step up.
What switch does the J7S use?
An AS4 pressure switch, preset at 30/50 psi. Set a precharged tank 2 psi below the cut-in pressure, so 28 psi with this switch, and check it once a year.
Can the J7S be used as a booster?
Goulds lists booster service among the JS series applications along with homes and cottages. Check the incoming supply pressure against the pump's published shut-off figures before using it that way.
