Comparison ยท Sump pumps

Superior Pump 92341 vs Wayne CDU790

Superior's 92341 and Wayne's CDU790 stand for the brands at 1/3 HP. The Wayne moves noticeably more water; the Superior answers with low current and a low pump-down level.

By Pumpendium Editorial · Updated November 2026

Superior Pump 92341

Superior Pump 92341 Cast Iron Sump Pump

1/3 HP epoxy-coated cast iron sump pump on a piggyback vertical float.

Check price at MRO Supreme
vs
Quick verdict

Choose the Superior Pump 92341 when low running current matters, you want the pit pumped down to about 2 in, and a plug-in switch you can replace in minutes appeals.

Choose the Wayne CDU790 when you want the most water per minute at every lift, a top intake that stays clear of silt, and a basin at least 11 in across is available.

Key specifications

SpecificationSuperior Pump 92341 Cast Iron Sump PumpWayne CDU790 Sump Pump
Horsepower1/3 HP1/3 HP
MotorSplit capacitor, 120 V, 4.1 A, oil-cooledSplit capacitor, 120 V, oil-filled
Max flow46 GPM (2,760 GPH)77 GPM (4,600 GPH)
Flow at 5 ft36 GPM64 GPM (3,810 GPH)
Flow at 10 ft30 GPM (1,800 GPH)51 GPM (3,060 GPH)
Flow at 15 ft25 GPM37 GPM (2,220 GPH)
Flow at 20 ft12 GPM20 GPM (1,200 GPH)
Max lift25 ftNot stated; table ends at 20 ft
IntakeBottom suction with intake screen, 3/8 in solidsTop suction, glass-reinforced polycarbonate impeller
SwitchPiggyback vertical float, on 6 in, off 2 inVertical float with guard, on 9 in, off 4 in
HousingEpoxy-coated cast iron body and baseEpoxy-coated steel, cast iron volute
Cord10 ft8 ft
Weight19.3 lb22 lb
Warranty3-year limited3-year limited

Figures: Superior Pump 92341 product page; Wayne CDU790 product page; Superior Pump submersible sump pump owner's manual (10-08 edition); Wayne CDU790 and CDU800 sell sheet.

Scorecard

CriterionEdgeWhy
Flow at a 10 ft liftWayne CDU790 Sump PumpWayne lists 51 GPM at 10 ft for the CDU790; Superior lists 30 GPM for the 92341.
Silty pitsWayne CDU790 Sump PumpThe Wayne intake sits at the top of the pump, away from sediment on the pit floor.
Running currentSuperior Pump 92341 Cast Iron Sump PumpSuperior rates the 92341 at 4.1 A; Wayne does not print a running current for the CDU790.
How low it pumps the pitSuperior Pump 92341 Cast Iron Sump PumpThe Superior float stops near 2 in, the Wayne near 4 in, leaving less standing water.
Cord reachSuperior Pump 92341 Cast Iron Sump PumpA 10 ft cord on the Superior against 8 ft on the Wayne helps when the outlet is farther away.

Which models stand for each brand

People comparing Wayne and Superior are usually choosing a basement pump around 1/3 HP, and one search asks exactly that. Wayne's best-known pump at that size is the CDU790, a coated steel and cast iron pump with a vertical float. Superior's closest match is the 92341, its 1/3 HP cast iron pump with a vertical float switch.

Both plug into a standard outlet, both use a 1-1/2 in NPT discharge and both carry three-year limited warranties. Either one can usually go into the other's pit without new pipe, provided the float has room to travel.

A clear gap in capacity

This is the biggest difference. Wayne's table for the CDU790 reads 4,600 GPH at no lift, 3,810 at 5 ft, 3,060 at 10 ft, 2,220 at 15 ft and 1,200 at 20 ft, or 77, 64, 51, 37 and 20 GPM. Superior's manual gives the 92341 46, 36, 30, 25 and 12 GPM at the same points, and its product page confirms 1,800 GPH at 10 ft.

At a 10 ft lift the Wayne moves about 70 percent more water. In a pit that fills slowly that just means shorter cycles. In a pit that surges during spring thaw, it can decide whether the pump keeps up. Superior quotes a 25 ft maximum lift, while Wayne's table simply stops at 20 ft, so neither is the right tool for a very tall discharge. The sizing calculator places your head on both curves.

Where each pump draws water

The 92341 is a bottom-suction pump with a removable intake screen and a vortex impeller that passes 3/8 in solids. Superior notes that without its switch the pump can lower the water to 3/4 in, which makes it useful for clearing a flooded floor as well as for pit duty.

The CDU790 draws from the top. Debris that settles in the pit stays below its intake, and Wayne says the layout prevents air lock, so no weep hole is needed. The catch is that a top-suction pump leaves more water in the pit, which is one reason its float stops higher.

Switch styles and pit room

Superior's switch is a vertical float on its own piggyback cord. The switch plugs into the outlet, and the pump plugs into the back of it. Superior's parts table lists the switch as the 92010, so replacing it is a plug-in job. It starts at about 6 in and stops at about 2 in, keeping the water low.

Wayne's float rides inside a guard on the pump, starting at about 9 in and stopping at about 4 in. Wayne asks for an 11 in basin with an inch of clearance to the wall, and sells float and float-top kits as spares. Both designs are vertical floats, so neither needs the wide swing of a tethered switch. Our float switch guide covers the wider choices.

Iron, steel and weight

Superior builds the 92341 motor casing, pump body and base in epoxy-coated cast iron, with dual o-ring motor seals, ball bearings and a stainless shaft. It weighs 19.3 lb.

Wayne wraps the CDU790 motor in epoxy-coated steel and casts the volute and seal plate in iron, with John Crane carbon and ceramic seals and ball bearings in oil. It weighs 22 lb. Wayne markets the CDU790 for very quiet running; Superior's page emphasises its copper windings and efficient motor. In practice, both are solid choices for groundwater, and neither should be used for sewage.

Cords, current and warranty

Superior lists the 92341 at 4.1 A on a 120 V circuit, a light load that suits a shared outlet or a backup inverter. Wayne recommends a 15 A circuit for its sump pumps but does not print the CDU790's running current on the sell sheet or product page. The Superior also has the longer cord, 10 ft against 8 ft.

Both warranties run three years. Wayne's manual calls for a look at the pump several times each year, checking that it has not shifted and that nothing has collected on the float. Superior recommends a ground fault device on the outlet. Whichever you choose, test the pump with a bucket of water before the wet season starts.

Spare parts follow the same pattern as the switches. Superior sells the plug-in float switch as its own part, while Wayne sells float and float-top kits made for the CDU790. Either way a worn switch is a small repair rather than a new pump, which is worth knowing before the warranty runs out.

Who each one fits

The Superior Pump 92341 Cast Iron Sump Pump fits if

  • The basement outlet is shared, or backup power is limited, so 4.1 A helps.
  • You want only about 2 in of water left standing in the pit.
  • The outlet is several feet from the pit and 10 ft of cord reaches it.
  • You want a switch that unplugs and swaps without tools.

Full reference

The Wayne CDU790 Sump Pump fits if

  • Storms fill the pit fast and you want the most flow at a 10 ft lift.
  • Silt, sand or gravel collects on the pit floor.
  • Your basin measures 11 in or wider, leaving the guarded float its inch of clearance to the wall.
  • You value very quiet running from ball bearings in an oil bath.

Full reference

Questions readers ask

Is Wayne or Superior Pump the better sump pump brand?

At 1/3 HP, the Wayne CDU790 moves considerably more water at every published lift, while the Superior 92341 draws little current and pumps the pit lower. Both have three-year warranties. Pick the Wayne for capacity and the Superior for light electrical load.

Which 1/3 HP pump moves more water?

The Wayne CDU790. Its table shows 51 GPM at 10 ft and 37 GPM at 15 ft, against 30 GPM and 25 GPM for the Superior 92341. The gap is largest at short lifts and narrows as the pipe climbs.

Can a Wayne CDU790 replace a Superior 92341?

Usually. Both thread onto a 1-1/2 in NPT discharge. Make sure the basin is at least 11 in across, and note that the Wayne starts at about 9 in instead of 6 in, so check the inlet pipe sits above that level.

Do I need a weep hole with either pump?

Not for the Wayne, whose maker states that top suction removes the need. Superior's manual does not call for one on the 92341, but if a check valve traps air and the pump hums without moving water, a small relief hole below the valve is the usual fix.

Final verdict

At 1/3 HP these two brands take different paths. The Wayne CDU790 is the capacity choice, with far more flow at every lift and a top intake for dirty pits. The Superior 92341 is the low-load choice, drawing little current, pumping the pit lower and offering a plug-in replacement switch. If your pit floods quickly, choose the Wayne; if power is the constraint, the Superior.

How we research · Disclosure