Residential grinder pump ยท Zoeller

Zoeller M802 Grinder Pump

Zoeller's M802 is a 1/2 HP cast iron residential grinder pump with a built-in float switch and a 2 in NPT discharge. The maker's catalog table rates it at 48 GPM at 5 ft of head and 29.5 ft at shut-off.

Model M802 · part number 802-0001 · Updated November 2026

Horsepower
1/2 HP
Voltage
115 V
Max flow
48 GPM (182 LPM) at 5 ft
Max head
29.5 ft (9.0 m) shut-off head
Switch type
Integral automatic float switch
Discharge
2 in NPT

Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Quick verdict

In short

The M802 is aimed at a house whose sewage basin keeps jamming on wipes and paper towels, yet whose discharge line was plumbed for an ordinary ejector. Its 2 in outlet lets it connect to that pipe size, and the float comes built in. The limit is lift: the catalog table shows only 17 GPM at 25 ft and nothing beyond the shut-off, so long or tall runs call for a bigger grinder.

Who it fits, and who should skip it

A good fit if

  • Your current sewage ejector clogs on rags or wipes and you want a grinder without repiping the basin.
  • The existing discharge line is 2 in pipe, matching this pump's threaded outlet.
  • Total head from the basin floor to the sewer connection is about 20 ft or less, where the table still shows 27 GPM.

Look elsewhere if

  • The run to the sewer climbs or stretches toward 25 ft of total head, where the table drops to 17 GPM.
  • You want a grinder with a smaller 1-1/4 in outlet or far more head; Zoeller's 803, 805 and 807 cover that ground.

Specifications

Motor

Horsepower1/2 HP
Voltage115 V
Motor coolingOil-filled for heat dissipation

Figures: Zoeller Pump Company catalog FM0532, Model 802 page and grinder performance table; Amazon listing B0GY5ZY8RJ (Zoeller M802, 802-0001).

Performance

Max flow48 GPM (182 LPM) at 5 ft
Max head29.5 ft (9.0 m) shut-off head
Flow at 10 ft41 GPM (155 LPM)
Flow at 15 ft35 GPM (132 LPM)
Flow at 20 ft27 GPM (102 LPM)
Flow at 25 ft17 GPM (64 LPM)

Figures: Zoeller Pump Company catalog FM0532, Model 802 page and grinder performance table; Amazon listing B0GY5ZY8RJ (Zoeller M802, 802-0001).

Switch

Switch typeIntegral automatic float switch
On / off levelsNot stated in the catalog or on the listing

Figures: Zoeller Pump Company catalog FM0532, Model 802 page and grinder performance table; Amazon listing B0GY5ZY8RJ (Zoeller M802, 802-0001).

Build

Discharge2 in NPT
ConstructionCast iron motor housing and discharge
Cutting systemGrinding mechanism reduces solids to a slurry; cutter design not detailed by the maker
Power cord9 ft with Zoeller LED plug
Size10.5 x 10.5 x 16.25 in (listing)
Weight28 lb (listing)
ApplicationResidential wastewater

Figures: Zoeller Pump Company catalog FM0532, Model 802 page and grinder performance table; Amazon listing B0GY5ZY8RJ (Zoeller M802, 802-0001).

Controls

Duplex alternatorSmartPak Plus 10-5858 alternates two pumps up to 1/2 HP, 12 A each, 115 V

Figures: Zoeller Pump Company catalog FM0532, Model 802 page and grinder performance table.

Ownership

Warranty3-year (listing)

Figures: Amazon listing B0GY5ZY8RJ (Zoeller M802, 802-0001).

Versions

Zoeller sells the M802 as one automatic, single-phase version. Part 802-0001 is the number printed on the listing as the maker's part number.

VersionPart numberWhat differsListing
M802, automatic, 115 V802-0001Integral float switch, 9 ft cord with LED plug, 2 in NPT dischargeView on Amazon

Figures: Amazon listing B0GY5ZY8RJ (Zoeller M802, 802-0001); Zoeller Pump Company catalog FM0532, Model 802 page and grinder performance table.

Installation and setup

The M802 was drawn up as a replacement for a solids-handling sewage pump. Zoeller's catalog singles out the 2 in discharge as the feature that makes that change-out easy, since it connects to the pipe size an ejector basin already has. Zoeller's 803 to 807 grinders use a 1-1/4 in outlet instead.

Set the pump level on the basin floor so the integral float moves freely, clear of the wall and inlet pipe. Check the listed 10.5 x 10.5 x 16.25 in size against the lid opening.

Plug the 9 ft cord into a grounded outlet close to the basin; its lighted plug shows at a glance whether that outlet is live. Sewage basins must be sealed and vented to local code, so have a licensed plumber sign off the vent and lid.

Switch and sizing notes

The switch is integral and automatic, so the pump starts and stops itself as the basin fills. Neither the catalog nor the listing prints the on and off levels, so measure the float travel on the pump itself before deciding how much basin depth it needs.

Size from Zoeller's printed table rather than the 48 GPM headline. Add the vertical rise from the basin floor to the highest point of the discharge pipe to a friction allowance for the horizontal run and fittings. Then read the flow at that total: 48 GPM at 5 ft, 41 GPM at 10 ft, 35 GPM at 15 ft, 27 GPM at 20 ft and 17 GPM at 25 ft, falling to nothing at the 29.5 ft shut-off. The guide to ejectors, grinders and sump pumps explains when grinding is worth having.

Ownership and maintenance

An oil-filled motor needs no lubrication, so routine care is about the basin. Every few months, run water in until the float lifts and the pump cycles, then watch it shut off cleanly. Zoeller pitches the 802 at the flushable household materials that defeat ejectors, yet it remains a sewage pump rather than a disposal, so grease and anything that is not flushable should stay out of the drains.

The listing states a 3-year warranty, so keep the receipt with the basin paperwork. Where a failure would back sewage into finished space, consider a duplex basin with an alternator panel and a high-water alarm.

Pros and cons

Pros

  • A 2 in NPT outlet suits an existing ejector line.
  • Integral automatic float, with no separate switch to mount.
  • Cast iron motor housing and discharge around an oil-filled motor.
  • Lighted plug shows whether the outlet has power.

Cons

  • Switch on and off levels are not printed in the catalog or on the listing.
  • A 29.5 ft shut-off head rules out long or tall runs.
  • Cutter design and the size it grinds to are not detailed by the maker.

Alternatives worth comparing

Final verdict

Choose the M802 when an ejector basin keeps jamming on household debris and the pipe is already 2 in, provided total head stays near 20 ft or less. For higher lifts or a narrow force main, Zoeller's 1-1/4 in grinders are the better fit.

Where to buy

Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

Is the Zoeller M802 a grinder or a sewage ejector?

It is a grinder. Zoeller files it in its fractional horsepower grinder series and describes it for residential wastewater where ejectors struggle with household materials. Unlike the 803 to 807 grinders it keeps a 2 in NPT outlet, which is what lets it replace a solids-handling ejector on the same pipe.

How high can the M802 pump sewage?

Zoeller's catalog lists a shut-off head of 29.5 ft (9.0 m). Useful flow ends earlier than that: the table shows 27 GPM at 20 ft and 17 GPM at 25 ft. Keep your total dynamic head, friction included, well inside that range.

What part number should I order?

The automatic 115 V pump is 802-0001, the number the listing prints as the manufacturer part number. Zoeller's catalog refers buyers to sheet FM3498 for full product details, so match that sheet before ordering any replacement parts for it.

Can two M802 pumps share a duplex alternator?

Yes. Zoeller's SmartPak Plus residential alternator, sewage version 10-5858, alternates two automatic pumps of up to 1/2 HP and 12 A each on 115 V. The catalog warns that it is not for grinder pumps, naming the 802 as the one exception.