Convertible jet · Goulds

Goulds J5 Convertible Jet Pump

The Goulds J5 is a 1/2 HP convertible jet pump. Fitted with the FH5 shallow well adapter it serves water within 25 ft; with a Goulds twin-pipe deep well jet it reaches water as deep as 90 ft in a 4 in well.

Model J5 · part number J5 · Updated November 2026

Horsepower
1/2 HP
Voltage
115/230 V, capacitor start, single phase
Max flow
Not stated on the data sheet
Max head
Not stated on the data sheet
Switch type
AS4 pressure switch preset 30-50 psi

Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Quick verdict

In short

The J5's value is flexibility backed by a clear chart: Goulds names the exact jet assembly and control valve setting for each depth band. That takes the guesswork out of a deep-well jet installation. The trade-off is that you must buy the right adapter or jet separately, and Goulds' saved documents give no flow table for this model.

Who it fits, and who should skip it

A good fit if

  • Older two-pipe wells where water sits between 30 and 90 ft.
  • Shallow sources now, with the option to go deep later.
  • Owners who want Goulds' matched jet and valve settings.

Look elsewhere if

  • Buyers who need a published flow figure before choosing.
  • Anyone expecting the jet assembly in the carton.

Specifications

Motor

Horsepower1/2 HP
Voltage115/230 V, capacitor start, single phase
Maximum load amps10.8 A at 115 V, 5.4 A at 230 V
Circuit breaker25 A at 115 V, 15 A at 230 V

Figures: Amazon listing B009EBVCAS; Goulds jet pump installation manual IM102 (third-party copy).

Performance

Max flowNot stated on the data sheet
Max headNot stated on the data sheet

Figures: Goulds jet pump installation manual IM102 (third-party copy).

Jets

Shallow well adapterFH5 (nozzle AN017, venturi AD3731); FH5H high pressure
Twin-pipe jets, 4 in wellFT4B-13 to 40 ft; FT4B-31 to 60 ft; FT4B-08 to 90 ft
Control valve setting30 psi with these twin-pipe jets

Figures: Goulds jet pump installation manual IM102 (third-party copy).

Controls

Switch typeAS4 pressure switch preset 30-50 psi

Figures: Amazon listing B009EBVCAS.

Connections

Discharge1 in NPT; 1-1/4 in NPT suction; 1 in NPT drive

Figures: Amazon listing B009EBVCAS.

Build

ImpellerGlass-filled Noryl; Lexan diffuser with stainless wear ring
Max water temperature140 °F
Warranty1 year from installation or 18 months from date code

Figures: Amazon listing B009EBVCAS; Goulds jet pump installation manual IM102 (third-party copy).

Installation and setup

Decide first which way the pump will run. For water within 25 ft, bolt the FH5 shallow well adapter to the front of the pump, with its nozzle and venturi in place, and run a single suction pipe to a foot valve or check valve. For deeper water, a twin-pipe jet assembly goes down a 4 in or larger well on a suction pipe and a drive pipe, and the pump's third port feeds the drive line.

Goulds' manual is strict about suction piping: no high spots, no dips, a steady rise toward the pump, and every joint airtight. Pumps do not hold prime; piping and valves do. Keep a foot valve well clear of the bottom of the well.

On the outlet side, a tee with a plug or gauge in its top port becomes the priming port. Avoid valves and filters between pump and tank, which cause switch chatter.

Switch and sizing notes

The AS4 switch comes set at 30/50 psi; set the tank 2 psi below cut-in. On deep-well duty the control valve matters as much as the switch: Goulds lists 30 psi for the J5's twin-pipe jets, which keeps enough drive pressure for the jet to lift water.

Pick the jet by depth to water. Goulds pairs the J5 with the FT4B-13 for depths of 30 to 40 ft, the FT4B-31 for 30 to 60 ft and the FT4B-08 for 60 to 90 ft, all in 4 in wells. Packer versions suit 2 in wells. If your water sits near the bottom of that range, the 3/4 HP J7 gives more margin; our convertible jet guide explains the system.

Ownership and maintenance

The back pullout design lets the motor and impeller come out without disturbing the piping, and the shallow adapter has a nozzle clean-out plug. A diaphragm keeps water in the casing so the seal never runs dry, and the pump re-primes itself once water returns.

Goulds covers it for one year from installation or 18 months from the date code, whichever comes first.

Pros and cons

Pros

  • Goulds names the jet for each depth band.
  • Back pullout service without cutting pipes.
  • Seal protected by a water-holding diaphragm.
  • Optional high-pressure shallow adapter.

Cons

  • Jet or adapter bought separately.
  • No flow table in the saved documents.
  • Warranty lasts only one year.

Alternatives worth comparing

Final verdict

Choose the Goulds J5 when you need a convertible jet and want the maker to tell you exactly which jet and valve setting suit your depth. For water consistently within 25 ft, the built-in-jet J5S is simpler.

Where to buy

Each button opens this exact model's listing. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What do I need with a Goulds J5?

Goulds lists the pump, a pressure tank and either the FH5 shallow well adapter for water within 25 ft or a deep-well jet assembly for deeper water. The convertible J models do not have the jet built into the casing like the JS models.

Which deep well jet fits the J5?

For twin-pipe systems in a 4 in well, Goulds lists the FT4B-13 for 30 to 40 ft, the FT4B-31 for 30 to 60 ft and the FT4B-08 for 60 to 90 ft, each with a 30 psi control valve setting.

What breaker does the J5 need?

Goulds' motor table lists a maximum load of 10.8 A at 115 V and 5.4 A at 230 V, with breakers of 25 A and 15 A respectively. Voltage is changed inside the motor cover, not at the pressure switch.

What is the FH5H adapter?

It is the high-pressure shallow well adapter for the J5, with nozzle AN019 and venturi AD3528 in place of the standard AN017 and AD3731. It trades some low-pressure flow for higher pressure capability.